Shop for Jaguar Parts
and Land Rover Parts
Online and Save!


USMC logo
Here is information on preventing corrosion
on your Cooling Fan Module:



melting snow

1992-1994 Jaguar sedans are prone to batteries having a low state of charge due to their cooling fans staying on after the ignition has been shut off. The cause of this condition has been linked to corrosion in the cooling fan control module.


To repair this condition the corrosion must be removed from the control module. The real culprit however, is how the corrosion gets there. The corrosion is caused by water entering the ground wire cores and traveling inside the wire insulation to the module.


To prevent this from happening again, the ground wire eyelet connectors on the left inner front fender panel must be disconnected. The connectors then need to be sealed with heat shrink tubing to prevent water from entering the wires.




backarrowReturn to Tech Tips page

Parts Search
by Part Number
or Keyword.

New Products

Overstock / Clearance

Salvage Parts
Part #SEAL.KIT.4
Price: $269.41
navigate left
navigate right
Free Shipping Policy

Payment Options

Motorcars on Ebay